Call Us 22517474 or 25733343

Steel panel radiator with flat front panel and bottom middle connection

RADIK PLAN VKM is a steel panel radiator which enables a bottom middle connection to the pressurized heating system. There are two upper and two lower hangers welded at the back of the radiator. Radiators in length 1800 mm long and more have six hangers. RADIK PLAN VKM radiators are supplied with an air vent, two blanking plugs and a valve with a plastic cap.

Technical Data

Height (H) 300, 400, 500, 600, 900 mm

Length (L) 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000 mm

Depth (B)

- Type 11 PLAN VKM 65 mm

- Type 21 PLAN VKM 68 mm

- Type 22 PLAN VKM 102 mm

- Type 33 PLAN VKM 157 mm

Connecting pitch 50 mm

Connecting thread 6 × G½ inside

Highest allowed working pressure 10 bar

Highest allowed working temperature (°C) 110 °C

Radiator connection middle connection

Pressure Loss In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.

In case of one-pipe heating system it is necessary to set the valve at level 6. For adjusting the required mass flow in the radiator we recommend to use the compact connecting fitting with a fixed or adjustable flow volume of water in the radiator.