Call Us 22517474 or 25733343

Steel panel radiator for rooms with high demands on hygiene and cleanness with side connection

RADIK CLEAN is a steel panel radiator in the KLASIK version which allows a left or right side connection to the heating system. It is designed for pressurised or gravity-fed heating systems.

It has been modified for installation and operation in rooms with higher demands on hygiene and cleanness. All types are supplied without convector fins, top grills and side panels.

There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers. An air vent and blanking plugs are delivered as standard. We recommend using the drill-in brackets (type 18/120 – see the KORAMONT catalogue) which enable to mount the radiator in a distance of up to 65 mm from the wall.

Notice: If the requested distance between the radiator and the wall should be 65 ÷ 80 mm, the same type of brackets can be used on condition that the lower hangers are fixed with brackets (not with supporting pieces only). In such a case the additional brackets must be ordered extra.

Note: The RADIK CLEAN type 10 and RADIK KLASIK type 10 radiators are identical.

Technical Data

Height (H) 300, 400, 500, 600, 900 mm

Length (L) 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000 mm

Depth (B)

- Type 10 CLEAN 47 mm

- Type 20S CLEAN 100 mm

- Type 30 CLEAN 155 mm

Connecting pitch h = H - 54 mm

Connecting thread 4 x G½ inside

Highest allowed working pressure 10 bar

Highest allowed working temperature (°C) 110 °C

Radiator connection left or right side

Pressure Loss The pressure loss of the radiator for the respective working conditions can be calculated by means of the value of the flow coefficient AT or the resistance coefficient ξT

The store will be closed on Saturday 21/10/2023 and Saturday 28/10/2023
This is default text for notification bar