Zinc-coated panel radiator with right bottom connection
Zinc-coated panel radiators RADIK are intended for rooms with a high risk of corrosion because of high humidity or chemically aggressive environment. Resistance to corrosion is increased with a layer of zinc coating which slows down the corrosion process and results in an extended life of the radiator.
RADIK VK – Z is a steel panel radiator in VENTIL KOMPAKT version which allows right bottom connection to a pressurized heating system. There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers.
Notice: Because of the particular qualities of the zinc-coating and the use of special polyester paint, the zinc-coated radiators are not exactly identical in appearance to the standard RADIK radiators.
Technical Data
Height (H)
300, 400, 500, 600, 900 mm
Length (L)
400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000 mm
Depth (B)
- Type 10 VK
47 mm
- Type 11 VK
63 mm
- Type 21 VK
66 mm
- Type 22 VK
100 mm
- Type 33 VK
155 mm
Connecting pitch
50 mm
Connecting thread
6 × G½ inside
Highest allowed working pressure
10 bar
Highest allowed working temperature (°C)
110 °C
Radiator connection
right bottom
Pressure Loss
In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.
In case of one-pipe heating system it is necessary to set the valve at level 6. For adjusting the required mass flow in the radiator we recommend to use the compact connecting fitting with a fixed or adjustable flow volume of water in the radiator.
